Neat installs. Clear video. Alerts that make sense.
We mount and set up smart doorbells and security cameras for homes and small businesses — positioning for the best view, sorting power the safe way, and configuring apps so notifications are useful (not noisy). Wi-Fi and PoE options supported.
What we do
- Mount battery or wired smart doorbells (angle wedges/spacers as needed)
- Set up Wi-Fi cameras (indoor/outdoor) & basic PoE camera installs
- Configure apps: notifications, zones, privacy masks, shared users
- Chime setup (mechanical/digital) or plug-in chime pairing
- NVR setup or microSD/cloud recording guidance (model-dependent)
- Network tweaks for stability (SSID, 2.4 GHz onboarding, reservation)
Power & cabling options
- Battery doorbells with charging advice
- Low-voltage doorbell power kits / plug-in PSU (where suitable)
- Existing chime transformer checks & bypass kits (model-dependent)
- Surface-route Ethernet for PoE cams (injector/switch)
- Neat external cable runs, drilling & sealed penetrations
Before we visit
- Tell us the brand/model (e.g., Ring/Nest/Eufy, Reolink/UniFi/TP-Link).
- Share where you want it mounted and a photo of the door/wall or soffit area.
- Let us know your Wi-Fi router model and signal strength at the door/camera spot.
- If you have an old wired doorbell, send a photo of the chime box/transformer if present.
Important: We don’t install new mains spurs or work inside consumer units.
We can use low-voltage power kits, plug-in PSUs, or PoE where suitable, and we’ll advise if a
qualified electrician is required. Safe ladder heights only; no dangerous roofline work.
Please consider signage and neighbour privacy when using cameras.
FAQs
Battery is quick and flexible; wired gives continuous power and can ring an existing chime (model-dependent).
If wiring isn’t available, a plug-in chime and low-voltage PSU are good options.
Often yes, with the correct power/transformer and (for some brands) a bypass or “pro” power kit.
We’ll check compatibility on arrival and configure the chime type in the app.
Yes — we can surface-route Cat cable neatly, drill/seal the penetration and connect via PoE injector or PoE switch.
We don’t chase walls or alter mains electrics.
Absolutely — we’ll pair devices, adjust zones and notifications, and invite household members with the right permissions.
We can also integrate with your smart display where supported.
Yes — we’ll explain pros/cons and set up what your model supports. For multi-camera systems, an NVR with PoE is often best.
Get a fast quote
Tell us the model, where you want it, and your Wi-Fi/Ethernet situation.
Helpful photos: front door area straight-on, existing chime/transformer (if present), and the route for any Ethernet/power.